Ensure the Zooka is charged or that the Zooka is connected to a power source.

1. Press the Power button located on the top of the Zooka to turn it on .

2. Press and hold the Bluetooth button (up to 3 seconds) on Zooka until the power indicator on the top of the Zooka starts to flash red and blue (Zooka will try for 3 minutes to connect/pair with your Bluetooth device).

3. Set your Bluetooth device to Searching/Discovery mode (new device searching). ‘Zooka’ will appear on your Bluetooth device.

4. Select ‘ Zooka’ and enter ‘0000’ if your device requests a passcode/PIN.

After successful pairing, the LED on the top of the Zooka will turn solid blue and a beep will sound.

The unit’s default audio input is Bluetooth. The source will automatically switch to Aux in mode when a 3.5mm stereo audio cable is connected, but it will not disconnect from the Bluetooth connection. The Bluetooth connection is muted.

The Zooka will automatically switch back to the muted Bluetooth connection when the plug is removed from the 3.5mm audio jack.