FAQ's
Default solution folder, feel free to edit or delete it.
It is hard to give an exact time for the initial charging of your Zooka. Zooka batteries are partially charged when they leave the factory, but they may be o...
Wed, 24 Sep, 2014 at 7:26 AM
You can charge your Zooka with any USB A/C adapter. Remember that the USB port on the Zooka is "micro" USB. Like this one for example. Any USB micr...
Thu, 14 Aug, 2014 at 10:48 AM
While your Zooka is charging, the LED will flash blue. When fully charged, the LED will be solid blue.
You cannot over charge the Zooka.
Your Zooka w...
Fri, 10 Oct, 2014 at 12:38 PM
Sometimes our gadgets get confused. To reset the firmware on your Zooka:
1. Turn your Zooka off.
2. Plug in a USB charging source (a computer or USB...
Mon, 22 Sep, 2014 at 10:14 AM
The Zooka uses 5V DC to charge and operate. Some sort of transformer needs to convert the wall voltage to the 5 volts. In the case of a computer, the USB por...
Thu, 14 Aug, 2014 at 10:38 AM
Your laptop may not have a Bluetooth chip installed.
Please go to Start/Control Panel/Network adapters and see if there is a Bluetooth chip installed.
...
Mon, 22 Sep, 2014 at 5:33 AM
The Zooka wireless speaker bar will work with any bluetooth enabled device supporting A2DP. Most Windows PC's do not have built-in bluetooth capability ...
Tue, 29 Apr, 2014 at 2:34 PM
1. Click on Windows Start icon bottom left of screen
2. Click on Printers and Devices on right side of Start menu
3. Click on Add Device
4. Turn on Z...
Mon, 13 Oct, 2014 at 9:35 AM
While charging the blue LED flashes. When fully charged the LED will be solid blue. You can use your Zooka while you are charging it.
The LED will altern...
Thu, 9 Oct, 2014 at 1:15 PM
The nature of Bluetooth connections; paired and encrypted, prevents more than one device being connected to your Zooka at one time. There is a table of pas...
Sun, 10 Aug, 2014 at 10:47 PM